News

  • Reasons and Solutions for Failure of Opening the Inlet Valve of Screw Air Compressor

    Reasons and Solutions for Failure of Opening the Inlet Valve of Screw Air Compressor

    The air inlet valve of screw air compressor is a component that controls the air pressure in the air tank. The commonly used air inlet valve has a rotating disc structure and a reciprocating valve plate mechanism. The disc or valve plate is used to open or close the air inlet to control the air ...
    Read more
  • How to solve the ash spraying during nitrogen generator operation

    How to solve the ash spraying during nitrogen generator operation

    Ash spraying fault of nitrogen generator is also called carbon molecular sieve crushing. This is due to loose pressure of carbon molecular sieve or loose carbon molecular sieve, resulting in black smoke from powder spraying of nitrogen generator. At this time, the whole system needs to completel...
    Read more
  • The Reason Of Large Vibration During The Nitrogen Generator Operation

    The Reason Of Large Vibration During The Nitrogen Generator Operation

    When the nitrogen generator motor moves, the first symptom is that the motor vibration and noise increase significantly. As the movement of the shaft will change the clearance of the power unit, the acting length between the rotor and the stator core and other parameters. Pulsation may occur dur...
    Read more
  • Why add buffer tank in front of nitrogen generator?

    Why add buffer tank in front of nitrogen generator?

    The buffer tank reduces the gas flow, acts as a buffer, reduces the system pressure fluctuation, makes the compressed air remove impurities such as water through the compressed air purification, and reduces the load of the subsequent PSA O2N2 separation system; At the same time, when the adsorpti...
    Read more
  • How to remove the water inside the nitrogen generator?

    How to remove the water inside the nitrogen generator?

    How to remove water from nitrogen generator? If there is still water in the nitrogen generator, it can be removed by cleaning. There are mainly two methods: adsorption method and freezing method. Adsorption is a method of adsorbing steam and liquid on the surface. The air enters through the adso...
    Read more
  • What Parts Are The Nitrogen Generator Composed Of?

    What Parts Are The Nitrogen Generator Composed Of?

    Nitrogen buffer tank The nitrogen buffer tank is used to balance the pressure and purity of nitrogen separated from the nitrogen oxygen separation system to ensure the continuous supply of nitrogen. At the same time, after switching the adsorption tower, part of the gas will be recharged into th...
    Read more
  • Status of Nitrogen Generator During Normal Operation

    Status of Nitrogen Generator During Normal Operation

    1. The power indicator of nitrogen generator is on, and the cycle indicator of left suction, pressure equalizing and right suction is on, indicating the start of nitrogen generation process; 2. When the left suction indicator light is on, the pressure of the left adsorption tank gradually rises ...
    Read more
  • Analysis of Non Conformance of Nitrogen Generator Purity

    Analysis of Non Conformance of Nitrogen Generator Purity

    Common faults and solutions of nitrogen generator with unqualified purity include: too high flow rate, expired carbon molecular sieve, solenoid valve control, regulating control of regulating valve, etc. in case of unqualified purity, contact the manufacturer in time, and do not allow non profes...
    Read more
  • What are the application fields of oxygen generator?

    What are the application fields of oxygen generator?

    As early as the early stage of the development of oxygen generation technology, the equipment volume of oxygen generators was relatively large, and the application threshold of oxygen was very high. With the development of PSA oxygen generation technology, it became easy and convenient to obtain...
    Read more
  • What Is A Mobile Vehicle Mounted Nitrogen Generator

    What Is A Mobile Vehicle Mounted Nitrogen Generator

    The mobile vehicle mounted nitrogen generator is a nitrogen equipment designed and manufactured based on pressure swing adsorption (PSA) nitrogen production technology, which is convenient and mobile. The on-board mobile nitrogen generator also has the characteristics of high integration, small f...
    Read more
  • How to operate the nitrogen generator to prolong its service life?

    How to operate the nitrogen generator to prolong its service life?

    1. When using the nitrogen generator, the operator shall close the nitrogen generator, the nitrogen inlet valve and the sampling valve, and also close the power switch of the nitrogen generator. After the system and pipeline completely eliminate the waste concentrated oxygen, adjust the oxygen a...
    Read more
  • 7 Attentions for Nitrogen Generator Operation

    7 Attentions for Nitrogen Generator Operation

    PSA nitrogen generator is a kind of on-site nitrogen generator. It uses the air provided by the air compressor as raw material to produce the required pure nitrogen. The purity can be customized by 95% ~ 99.999%. The advantages of this method are that the cost of nitrogen is extremely low, only ...
    Read more
12345 Next > >> Page 1 / 5